SHURE / PERSONAL WIRELESS MONITORS
P3TR112GR
PSM 300 wireless personal monitor system with SE112-GR earphones.
Inclus
- (1) P3T transmitter
- (1) P3R or P3RA bodypack receiver
- (1) SE112-GR earphones
- (1) PS24US power supply
- (1) 1/4-wave antenna
- (2) AA alkaline batteries
- (1) Rackmounting kit
- (1) Zipper bag
Shure P3T, PSM300 Transmitter
- RF Output Power 10, 20, 30 mW
- Note: varies by region
- RF Output Impedance 50 Ohms (typical)
- Transmission Range 300' (90 m)
- Audio Input : Connector Type 1/4" TRS (6.35 mm)
- Impedance 40 kOhms (actual)
- Nominal Input Level Switchable, +4 dBu, -10 dBV
- Maximum Input Level +4 dBu: +22 dBu, -10 dBV: +12.2 dBu
- Phantom Power Protection Up to 60 VDC
- Audio Output : Connector Types 1/4" TRS (6.35 mm)
- Antenna 1/4 wave, detachable
- Power Requirement 12 to 15 VDC, 260 mA maximum
Shure P3R Wireless Bodypack Receiver
- RF Sensitivity Active: 2.2 μV (at 20 dB SINAD)
- Image Rejection > 90 dB
- Adjacent Channel Rejection > 60 dB
- Intermodulation Attenuation > 50 dB
- Blocking > 60 dB
- Audio Output Power 1 kHz @
- Minimum Load Impedance 16 ohms
- Headphone Output 1/8" (3.5 mm) stereo
- Battery Life 5-7 hours (continuous use) AA batteries
Shure SE112 Sound Isolating Earphones (Gray) Specs
- Type Single dynamic MicroDriver
- Sensitivity 108 dB SPL/mW
- Frequency Range 25 Hz to 17 kHz
- Cable Length 50" (127 cm)
